How Much Recycling Actually Gets Recycled and What Stops It

Recycling rates between 5% and 60% get quoted in the same conversation, all with confidence and most without a source. This article separates what is being measured from what is being claimed, using EPA, Eurostat and OECD data. It covers why two honest sources give different answers, why EU member states range from 23.0% to 59.5% under one shared definition, what fails at the collection end, why a sorting plant operates on thresholds, what the economics do when virgin resin prices fall, and where processing technology actually sits in the picture.

27 Aug

Tecnología | SUHUI Machinery

The PET Bottle Waste Pathway From Bin to Bottle Grade

A PET bottle changes hands five times and changes physical form four times between a collection bin and a new product, and no single business owns it end to end. This article follows the material rather than the machinery — the six places it physically exists, how value moves along the ladder, the four destinations open to recovered PET and the quality gate in front of each, why colour fixed at the first handoff caps everything afterwards, what solid state polymerization does in the bottle-to-bottle route, and the five points where material leaves the pathway altogether.

27 Aug

Tecnología | SUHUI Machinery

How Washing Lines Recycle Plastic Bottles Into Flake

A used PET bottle is polymer plus about seven things that are not polymer, and every stage of a washing line exists to remove one of them. This article reads the line backwards from the contamination — what is being taken off at each point, what controls whether the removal works, what the failure looks like downstream, why the float-sink tank cannot remove PVC, why water chemistry is a live process variable, and where a tonne of bale loses weight before it becomes flake.

27 Aug

Noticias del Sector | SUHUI Machinery

What PCR Plastic Is and How Buyers Verify the Content

PCR plastic has moved from a marketing preference to a purchasing specification, but a recycled content percentage on a datasheet is a claim rather than a measurement. This article covers what post-consumer recycled plastic is and how it differs from post-industrial, the three forces now driving demand, the chain of custody models that produce a verified percentage, the records each link in the supply chain has to keep, why two loads at the same percentage behave differently in a moulding machine, and what a recycling line has to be capable of to supply the same specification twice.

26 Aug

Tecnología | SUHUI Machinery

What Polymer Recycling Covers Beyond the Common Six

Polymer recycling covers the materials the commodity resin codes leave out — polycarbonate, polyamide, acetal, PBT, thermoplastic elastomers, reinforced compounds and multilayer structures. Almost all of it is recovered through closed industrial channels rather than household collection. This article covers what each engineering thermoplastic fails at, why glass fibre changes the machine rather than just the recipe, why drying is a chemical requirement for condensation polymers, and the four adjustments an engineering polymer stream forces on a line.

26 Aug

Noticias del Sector | SUHUI Machinery

Mechanical vs Chemical Recycling and Where Each One Fits

Chemical recycling breaks a polymer back into monomers or feedstock oils and rebuilds it. Mechanical recycling leaves the chain intact and removes everything around it. This article compares the two on engineering grounds — the three chemical technologies and what each accepts, which material streams suit which route, what quality of output each can deliver, and why the scale threshold rather than the chemistry decides what actually gets built.

26 Aug

Tecnología | SUHUI Machinery

How Mechanical Recycling Works Line by Line

Mechanical recycling recovers plastic without changing its chemistry — sorting, size reduction, washing, density separation, dewatering and drying, and pelletizing. This article walks the six stages in the order the material meets them, and for each one answers what physically leaves the stream, which single variable decides whether the stage works, and which materials force you to reinforce it.

Blog del Sector del Reciclaje de Plástico

How Much Recycling Actually Gets Recycled and What Stops It

The PET Bottle Waste Pathway From Bin to Bottle Grade

How Washing Lines Recycle Plastic Bottles Into Flake

What PCR Plastic Is and How Buyers Verify the Content

What Polymer Recycling Covers Beyond the Common Six

Mechanical vs Chemical Recycling and Where Each One Fits

How Mechanical Recycling Works Line by Line

Buscar una Guía por Material

Explorar por Tema

¿No sabe qué línea se adapta a su material?